All sides, from 800 mm and above, are strengthened by folded edges. Fixed onto M8 press welded studs to the rear of the enclosure. On the top and bottom there are holes to facilitate cable fixing. The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. Resistance to corrosion must be taken into consideration for outdoor and indoor applications. For outdoor installation, the use of a rain Hood, ARF, and 100% polyester paint coating plus corrosion protection primer is recommended. Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier.Ĭomplies with IP 66 | TYPE 4, 12 | IK 10. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter × 2 mm depressions, to allow air circulation around the rear part of the enclosure.
0 Comments
Leave a Reply. |